Oil press selection guide
Every user who buys oil press wants to buy good quality and low price oil press, which is our characteristic! In fact, good quality and low price is cost-effective oil press. At the same time, I also hope that the service of the oil press manufacturers can be comprehensive and thoughtful.
Elbow technology of vacuum oil filter
Since most of them are used for welding pipe fittings, in order to improve the quality of welding, the car is driven into the slot, leaving a certain Angle, there is a certain edge, this is more strict, how thick, how many Angle deviation range, there are rules.
Performance characteristics of oil press
1, high oil yield: the use of directional pressure, multistage propulsion, a clean press, oil yield is greatly improved.
2. Large production capacity: strengthen the feeding system, increase the speed of promotion, and effectively improve the work efficiency.
3, automatic temperature control: electronic program control, scientific heating, automatic control of press temperature.
Pneumatic oil filter operation process
1. Place the machine in a horizontal position, and lay a piece of accessory press cloth flat on the installed press cloth for slag removal.
2. Check whether the running direction of the air compressor is consistent with the direction marked on the equipment.
3. After checking, pour the crude oil from the oil inlet bucket into the crude oil barrel (the crude oil should be 1-1.5 cm lower than the air inlet of the crude oil barrel to stop the oil inlet).
Refiner operation process
After filtration by the filter -→ put into the hydration tank -→ open low speed stirring and heating -→ the system enters the state of insulation -→ add the saturated gel solution -→ open high speed stirring -→ add micro boiling water -→ continue to stir at high speed -→ stir to reduce the speed -→ static heating and stirring to make it static precipitation -→ discharge saponin -→ temperature rise -→ after dehydration treatment -→ pump into fine filtration Color pot -→ degumming oil -→ process completed